ARP
Click on the red underlined text to get to the source
... ethernet that respond to IP
ARP. Produces a list in the following format:
08:00:20:01:96:62 128.18.4.114 apptek4
...
... echo'' port,
then looks in the kernel's ARP cache for the
corresponding address entry. Explicit response (or
...
...
CAVEATS
Etherhostprobe will fill the kernel's ARP cache with
possibly useless entries, possibly causing delays to
programs foolishly attempting to accomplish real work.
...
... LIMITATIONS
If a given machine is not running IP ARP at the time
that it is probed, it will be considered nonexistent.
In particular, if a given machine is down at the time
...
... Runs on SunOS 3.5, and possibly elsewhere. The major
non-standard portion of code is ``tx_arp.c'', which
reads the kernel's ARP cache.
AVAILABILITY
...
... UDP, IP, ICMP, ARP and RARP packets. Packets
can be examined in any combination of summary, hex or
...
... MIB variables; getroute, getarp, getaddr, and getif
retrieve and display tabular information (routing
tables, ARP table, interface configuration, etc.), and
getid retrieves and displays system name, identifica-
...
... ethernets, the Address Resolution Protocol (ARP)
is commonly used for this translation. On BSD
systems, an interface ...
... "ifconfig" command, while the contents of a host's
ARP cache may be viewed by use of "arp" command.
4. IP ...
... indicate either that the destination host did not
respond to ARP (if it is used on your LAN), or that a
datagram ...