3 - 6 - A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X
agent
Click on the red underlined text to get to the source
... NetLabs CMOT Agent
NetLabs SNMP Agent
NETMON for Windows
NETscout
...
... MONET
net_monitor
Netlabs CMOT Agent
Netlabs SNMP Agent
...
... Netlabs CMOT Agent
Netlabs SNMP Agent
NETscout
NNStat
...
... MONET
net_monitor
Netlabs CMOT Agent
Netlabs SNMP Agent
...
... Netlabs CMOT Agent
Netlabs SNMP Agent
NetMetrix Load Monitor
NetMetrix Protocol Analyzer
...
... LANVista
LANWatch
Netlabs CMOT Agent
NetMetrix Protocol Analyzer
NETMON for Windows
...
... Netlabs CMOT Agent
Netlabs SNMP Agent
NETMON for Windows
NETscout
...
... MIB Manager from Empire Technologies
MONET
Netlabs SNMP Agent
NetMetrix Load Monitor
NetMetrix NFS ...
... snmpapi is an api toolkit for developing SNMP
applications and agents. The toolkit is simple and
very fast that can be used for any type of
application. It is very well suited for embedded
...
... routers. An example MIB II
agent for Sun Sparcstations is provided. snmpapi is
distributed in source form only.
...
...
ABSTRACT
sunsnmpd is a fully supported SNMP agent with MIB II
support for Sun Sparscations running SunOS 4.1 or
...
... The CMU SNMP Distribution includes source code for an
SNMP agent, several SNMP client applications, an ASN.1 ...
... library, and supporting documentation.
The agent compiles into about 10 KB of 68000 code. The
distribution includes a full agent that runs on a
...
... The agent compiles into about 10 KB of 68000 code. The
distribution includes a full agent that runs on a
Kinetics FastPath2/3/4, and is built into the KIP
appletalk ...
... ethernet gateway. The machine independent
portions of this agent also run on CMU's IBM PC/AT
based router ...
... HARDWARE REQUIRED
The KIP gateway agent runs on a Kinetics FastPath2/3/4.
Otherwise, no restrictions.
...
... pub/cmu-snmp.9.tar, and pub/kip-snmp.9.tar. The former
includes the libraries and the applications, and the
latter is the KIP SNMP agent.
Please direct questions, comments, and bug reports to
...
... published in 1990. It is designed to work with the
ISODE package and can act as a building block for the
construction of CMIP-based agent and manager
applications.
...
...
ABSTRACT
The EMANATE system provides a run-time extensible SNMP
agent that dynamically reconfigures an agent's MIB
...
... ABSTRACT
The EMANATE system provides a run-time extensible SNMP
agent that dynamically reconfigures an agent's MIB
without having to recompile, relink, or restart ...
... without having to recompile, relink, or restart the
agent. An EMANATE capable SNMP agent can support zero,
one, or many subagents and dynamically reconfigure to
...
... restart the
agent. An EMANATE capable SNMP agent can support zero,
one, or many subagents and dynamically reconfigure to
connect or disconnect those subagents' MIBs ...
... independent components and subsystems:
o Master SNMP agent which contains an API to communicate
with subagents.
...
... MECHANISM
Queries SNMP agent(s).
CAVEATS
...
... Management
Information Base (MIB). The browser is generic in that
it can connect to a CMIS agent without having any
prior knowledge of the structure of the MIB in the
...
...
BUGS
Unexpected termination of the agent can cause browser
to crash (ISODE bug!).
...
...
NAME
Netlabs CMOT Agent
KEYWORDS
...
...
MECHANISM
The Netlabs CMOT agent supports the control and moni-
toring of network resources by use of CMOT message
exchanges ...
...
NAME
Netlabs SNMP Agent.
KEYWORDS
...
...
MECHANISM
The Netlabs SNMP agent supports the control and moni-
toring of network resources by use of SNMP ...
... active simultaneously within a single network. The
second category is the "Agent", a hardware/software
device which is attached to a specific network ...
... network will have multiple segments and
multiple agents up to the point of having one agent
for each logical network ...
... segments and
multiple agents up to the point of having one agent
for each logical network segment ...
... That is, it does not include the protocol
decode function or the mechanism to retrieve actual
data from a remote agent. It does, however, include
complete statistics gathering and event and alarm
...
...
Frontier NETscout Models 9510 and 9515, and Model 9610
and 9615 are agent software packages that implement
selected network diagnostic functions when loaded into
...
...
Frontier NETscout Models 9520 and 9525, and Model 9620
and 9625 are agent software packages that are
identical in function to their respective models
described above except that they are for use on
...
... works traverses a local ethernet, then by stationing a
statistic gathering agent on each local network a pro-
file of network traffic ...
... file of network traffic can be gathered. Statistical
data is retrieved from the local agents by a global
manager.
...
...
MECHANISM
Local agents (statspy processes) collect raw traffic
data via a promiscuous ethernet ...
... ethernet tap. Statistical, fil-
tered or otherwise reduced data is retrieved from the
local agents by a global manager (the "collect" pro-
cess).
...
... network monitoring programs that run on
Unix systems. The software consists of a number of
monitoring agents that poll various parameters from any
system and put it in a format suitable for
post-processing ...
... post-processing. The post-processors can be a display
agent, an automated troubleshooting program, an
event logging program, etc. Presently, monitors for
tracking reachability ...
... rate, and nameservers have been developed and are in
use. Addition of more monitoring agents is easy and
they will be added as necessary. A display agent-
...
... use. Addition of more monitoring agents is easy and
they will be added as necessary. A display agent-
nocol(1) using curses has already been developed. Work
on an "intelligent" module is currently in progress for
...
... event logging and some automatic troubleshooting.
All data collected by the monitoring agents follows a
fixed (non-readable) format. Each data entry is termed
an event in NOCOL, and each event has certain flags and
...
... fixed (non-readable) format. Each data entry is termed
an event in NOCOL, and each event has certain flags and
severity associated with it. The display agent
nocol(1), displays the output of these monitoring
agents ...
... agent
nocol(1), displays the output of these monitoring
agents depending on the severity of the event. There
can be multiple displays running simultanously and
all process the same set of monitored data.
...
... CRITICAL, ERROR, WARNING and INFO. The severity
level is controlled independently by the monitoring
agents, and the decision to raise or set an event's
severity to any level depends on the logic imbedded in
the monitoring agent ...
... agents, and the decision to raise or set an event's
severity to any level depends on the logic imbedded in
the monitoring agent.
As an example, for the pingmon(8) monitor, if a site is
...
... assigned a severity of WARNING.
The display agent (and other data post-processors)
would use this event severity to decide whether to
...
... nocol
which simply displays the data collected by the
monitoring agents. It uses the curses screen
management system to support a wide variety of terminal ...
... MS-DOS, OverVIEW, Network kernel, Mouse driver, SNMP
agents for monitored devices.
AVAILABILITY
...
...
NAME
SNMP agent
KEYWORDS
...
...
ABSTRACT
The SNMP agent listens for and responds to network
management requests sent from SNMP-conforming network
management ...
... network
management requests sent from SNMP-conforming network
management stations. The SNMP agent also sends SNMP
traps ...
... SNMP communities and generation of traps
are fully configurable. The SNMP agent supports all
MIB-II variables except the EGP group ...
...
AVAILABILITY
The SNMP agent is included in TCPware for VMS, a
commercial product available under license from:
...
... SNMP proxy agents may be used to permit the monitoring
and controlling of network elements which are otherwise
...
... management protocol). Similarly, SNMP proxy agents may
be used to protect SNMP agents from redundant network
management ...
... proxy agents may
be used to protect SNMP agents from redundant network
management agents through the use of caches ...
... be used to protect SNMP agents from redundant network
management agents through the use of caches. Finally,
SNMP ...
... identified trap receivers. The proxy agent daemon is
designed to make the addition of additional vendor-
specific variables a straight-forward task. The proxy ...
... SNMP proxy agents may be used to permit the monitoring
and controlling of network elements which are otherwise
...
... management protocol). Similarly, SNMP proxy agents may
be used to protect SNMP agents from redundant network
management ...
... proxy agents may
be used to protect SNMP agents from redundant network
management agents through the use of caches ...
... be used to protect SNMP agents from redundant network
management agents through the use of caches. Finally,
SNMP ...
... identified trap receivers. The proxy agent daemon is
designed to make the addition of additional vendor-
specific variables a straight-forward task. The proxy ...
... client applications query
remote SNMP agents in a variety of modes, and generate
or collect SNMP traps ...
... or collect SNMP traps. Code for an example SNMP agent
that supports a subset of the Internet MIB ...
... management applications -- both clients and
agents. Example applications execute SNMP management
...
... operating
system dependencies and runs in a wide range of
environments. Certain portions of the example SNMP
agent code are specific to the 4.3BSD implementation of
the UNIX system for the DEC MicroVAX.
...
... 1) to act as building blocks for the construction of
SNMP-based agent and manager applications; and
2) to act as network management ...
... network management station applications and
network management agent applications. These libraries
hide the details of ASN.1 parsing and generation from
...
... host/gateway
agent daemon including a complete protocol stack and
runtime environment required to support an SNMP Agent
...
... agent daemon including a complete protocol stack and
runtime environment required to support an SNMP Agent
from SNMP Research.
...
... traps to identified trap receivers.
The agent daemon is designed to make the addition of
additional vendor-specific variables a
...
... command line utilities.
The Packaged Agent System is designed to aid the
hardware manufacturer who is not experienced with the
...
... traps to identified trap receivers. The
agent daemon is architected to make the addition of
additional vendor-specific variables a straight-forward
...
... NEXT and SET capability. User-defined polling and
multi-device [agent] capability. Configured via X
interface.
...
... actual value, delta or delta/interval.
Plot multiple MIB expressions from multiple agents
simultaneously. X Windows interface. Pause polling
...
... Echo Request to
monitor and control SNMP Agents. Network management
daemon implements Wollongong's Manager MIB ...
... LIMITATIONS
Limitations on number of management agents and network
management daemons not known at this time.
...
... MECHANISM
The xnetperfmon application communicates with remote
agents or proxy agents via the Simple Network Management
Protocol ...
... for variables provided by a single network management
agent. However, multiple invocations of xnetperfmon may
be active on a single display simultaneously or proxy ...
... active on a single display simultaneously or proxy
agents may be used to summarize information at a common
point.
...