RFC 1470:FYI on a Network Management Tool Catalog:...
RFC-Ref

echo


Click on the red underlined text to get to the source

... tool that sends packet probes such as ICMP echo mes- sages; to help distinguish tools, we do not consider ...


... IP socket to generate ICMP echo requests and receive ICMP echo ...
... echo requests and receive ICMP echo replies, and then examines the kernel ARP table to determine the ...
... MECHANISM Net components are pinged by use of ICMP echo and, optionally, CHAOS status requests and SNMP "gets." The ...
... ABSTRACT Net_monitor uses ICMP echo (and DECnet reachability ...
... Reachability is tested using ICMP echo facilities for TCP/IP hosts ...
... TCP/IP that supports ICMP echo request (ping). It has been run on VAX/VMS run- ning WIN ...
... any platform that provides a BSD-style programming li- brary with an ICMP echo request facility and curses. AVAILABILITY ...
... reachability is determined by performing an ICMP echo, UDP echo ...
... echo, UDP echo and a TCP echo at alternating three second ...
... UDP echo and a TCP echo at alternating three second intervals. The total number of packets sent and received are displayed, as well as the minimum, average ...
... and maximum round-trip times (in milliseconds) for each type of echo. Additionally, a "trace route" function ...
... MECHANISM The ICMP echo is performed by sending ICMP ECHO REQUEST ...
... ICMP echo is performed by sending ICMP ECHO REQUEST packets. The UDP and TCP ...
... necting to the UDP/TCP echo ports (port number 7). The ...
... route information is compiled by sending alter- nating ICMP ECHO REQUEST packets and UDP packets with very large destination ...
... TTL of 3, and so on. This pro- cess continues until an ICMP ECHO REPLY or UDP PORT UNREACHABLE is received. This indicates that the ...
... CAVEATS This utility sends one echo packet per second (ICMP, ...
... privilege to per- form the ICMP Echo and trace route functions. The ...
... privilege disabled, but only the UDP Echo and TCP Echo information will be ...
... UDP Echo and TCP Echo information will be displayed. This utility is written in C, but unfor- tunately it cannot be easily ported over to UNIX ...
... Ping is based on the ICMP ECHO_REQUEST message. ...
... OSI, XNS, and Xerox link-level echo packets to user- specified stations, performs loop round tests. ...
... or UDP packets, or ICMP Echo Requests. The packets are sent to a remote procedure call application at the des- ...
... Management Station uses SNMP and ICMP Echo Request to monitor and control SNMP Agents ...



Google
Web
RFC-Ref