RFC - 3380

Internet Printing Protocol (IPP): Job and Printer Set Operations

Original:	ftp://ftp.isi.edu/in-notes/rfc3380.txt
Authors:	T. Hastings [Xerox Corporation], R. Herriot [Consultant], C. Kugler [IBM Corporation], H. Lewis [IBM Corporation]
Date:	September 2002
Category:	Proposed Standard

---

Updates:
RFC-2911prop	Internet Printing Protocol/1.1: Model and Semantics (Updated by RFC-3996prop, RFC-3995prop, RFC-3382prop, RFC-3380prop)
RFC-2910prop	Internet Printing Protocol/1.1: Encoding and Transport (Updated by RFC-3995prop, RFC-3510prop, RFC-3382prop, RFC-3380prop, RFC-3381prop)

Referred by:	4 RFC
Refers to:	17 RFC

---

Status

This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited.

Copyright Notice

Copyright (C) The Internet Society (2002). All Rights Reserved.

Abstract

This document is an OPTIONAL extension to the Internet Printing Protocol (IPP/1.0 and IPP/1.1). This document specifies 3 additional OPTIONAL operations for use with the Internet Printing Protocol/1.0 (IPP) and IPP/1.1. The end user, operator, and administrator Set- Job-Attributes and Set-Printer-Attributes operations are used to modify IPP Job objects and Printer objects, respectively. The Get- Printer-Supported-Values administrative operation returns values that the IPP Printer will accept for setting its "xxx-supported" attributes.

---