RFC 4805:Definitions of Managed Objects for the DS...
RFC-Ref

MIB


Click on the red underlined text to get to the source

... accessed via a virtual information store, termed the Management Information Base or MIB. MIB objects are generally accessed through the Simple Network Management Protocol ...
... the Management Information Base or MIB. MIB objects are generally accessed through the Simple Network Management Protocol (SNMP ...
... Simple Network Management Protocol (SNMP). Objects in the MIB are defined using the mechanisms defined in the Structure of Management Information (SMI ...
... Structure of Management Information (SMI). This memo specifies a MIB module that is compliant to the SMIv2, which is described in STD 58, ...


... ifType variable in the Internet-standard MIB: ds1 (18) ...
... J1, and E1 line disciplines are similar enough that separate MIBs are unwarranted, although there are some differences. For example, Loss of Frame is defined more rigorously in the ESF ...
... ifDescr See interfaces MIB [RFC2863]. ...
... ifAdminStatus See interfaces MIB [RFC2863]. ...
... ifOperStatus See interfaces MIB [RFC2863]. ...
... ifLastChange See interfaces MIB [RFC2863]. ...
... ifName See interfaces MIB [RFC2863]. ...
... DS3, DS1, and DS0 MIBs to help the implementer use the objects correctly. Treatment of E3 ...
... ifIndex values are 2 through 29. In the DS1 MIB, there will be an entry in the dsx1ChanMappingTable for each DS1. The entries will be as follows: ...
... ifIndex values for the DS0s in the first DS1 are 30 through 53. In the DS0 MIB, there will be an entry in the dsx0ChanMappingTable for each DS0. The entries will be as follows: ...
... DS3 and DS1 MIBs to help the implementer use the objects correctly. ...
... ifIndex values are 2 through 8. In the DS1 MIB, there will be an entry in the dsx1ChanMappingTable for each DS2. The entries will be as ...
... second DS2, and so on. In the DS1 MIB, there will be an entry in the dsx1ChanMappingTable for each DS1. The entries will be as follows: ...
... Objectives of This MIB Module ...
... There are numerous things that could be included in a MIB for DS1 signals: the management ...
... interfaces. As such, a design decision was made up front to very closely align the MIB with the set of objects that can generally be read from these types of devices that are currently deployed. ...
... J2 interfaces are not supported by this MIB. ...


... DS1-MIB DEFINITIONS ::= BEGIN IMPORTS ...
... InterfaceIndex, ifIndex FROM IF-MIB -- [RFC2863] PerfCurrentCount, PerfIntervalCount, ...
... PerfCurrentCount, PerfIntervalCount, PerfTotalCount FROM PerfHist-TC-MIB; -- [RFC3593] ...
... LAST-UPDATED "200703050000Z" ORGANIZATION "IETF AToM MIB Working Group" ...
... DESCRIPTION "The MIB module to describe DS1, J1, E1 ...
... Trust (2007). This version of this MIB module is part of RFC 4805prop; see the RFC itself for full legal notices." ...
... The RFC 4805prop version of this MIB module." REVISION "200409090000Z" DESCRIPTION ...
... "The RFC 3895prop(-> 4805prop) version of this MIB module. The key changes made to this MIB module ...
... version of this MIB module. The key changes made to this MIB module since its publication in RFC 2495(-> 3895prop(-> 4805prop)) are as follows: ...
... "The RFC 2495(-> 3895prop(-> 4805prop)) version of this MIB module. The key changes made to this MIB module ...
... version of this MIB module. The key changes made to this MIB module since its publication in RFC 1406(-> 2495(-> 3895prop(-> 4805prop))) are as follows: ...
... (13) Added a lineStatus last change, trap and enabler. (14) The e1(19) ifType has been obsoleted, so this MIB does not list it as a supported ifType. ...
... -- note that this subsumes cept(19) and g703at2mb(67) -- there is no separate CEPT or G703AT2MB MIB -- The DS1 Near End Group ...
... ifIndex allows proper use of the ifStackTable and ds0/ds0bundle MIBs. Previously, this object was the identifier ...
... STATUS current DESCRIPTION "The value of MIB II's sysUpTime object at the time this DS1 ...
... interfaces table from the Internet-standard MIB. For example, consider an application managing a ...
... DESCRIPTION "Compliance statement for using this MIB for ISDN Primary Rate interfaces ...
... DESCRIPTION "Compliance statement for using this MIB for ISDN Primary Rate interfaces ...
... DESCRIPTION "Compliance statement for using this MIB for DS2 interfaces ...
... DESCRIPTION "Compliance statement for using this MIB for ISDN Primary Rate interfaces ...
... DESCRIPTION "Compliance statement for using this MIB for ISDN Primary Rate interfaces ...
... DESCRIPTION "Compliance statement for using this MIB for ISDN Primary Rate interfaces ...
... DESCRIPTION "Compliance statement for using this MIB for ISDN Primary Rate interfaces ...


... There are a number of management objects defined in this MIB module with a MAX-ACCESS clause of read-write ...
... dsx1LineStatusChangeTrapEnable The readable objects in this MIB module (i.e., the objects with a MAX-ACCESS other than not-accessible) may be considered sensitive in ...
... create/delete) the objects in this MIB module. It is RECOMMENDED that implementers ...
... SNMP entity giving access to an instance of this MIB module is properly configured to give access to the objects only to those principals (users) that have legitimate ...


... This document was produced by the AToM MIB Working Group. ...


... McCloghrie, K. and F. Kastenholz, "The Interfaces Group MIB", RFC 2863draft, June 2000. ...
... Tesink, K., "Textual Conventions for MIB Modules Using Performance History Based on 15 Minute Intervals", RFC 3593draft, September 2003. ...
... Management Information Base for Network Management of TCP/IP-based internets:MIB-II", STD 17, RFC 1213std17, March 1991. ...


... indices for DS1 interfaces are introduced in this MIB. These indices are dsx1IfIndex and dsx1LineIndex ...
... ifIndex) in the Internet-standard MIB (MIB-II STD 17, RFC 1213std17 ...
... Internet-standard MIB (MIB-II STD 17, RFC 1213std17) [RFC1213 ...


... (13) Added a lineStatus last change, trap and enabler. (14) The e1(19) ifType has been obsoleted, so this MIB does not list it as a supported ifType. ...



Google
Web
RFC-Ref