ATM
Click on the red underlined text to get to the source
... TDM) leased line. This service is
most likely to be used as an internal function in an ATM service
provider's network as a way to connect existing ATM ...
... ATM service
provider's network as a way to connect existing ATM switches via a
higher-speed PSN ...
... switches via a
higher-speed PSN, or to provide ATM "backhaul" services for remote
access to existing ATM ...
... transport mode for PWE3
ATM encapsulation described in [2], and MUST be used with pseudowires ...
... port service emulates connectivity between two
remote ATM ports. This service is useful when one desires to connect
...
... layer. The ingress PE discards any
idle/unassigned cells received from the ingress ATM port, and maps
all other received cells to a single pseudowire ...
... Priority (CLP) bits when it sends these cells on the egress
ATM port. Therefore, the transparent port service ...
... 3], the ingress PE MUST NOT exceed the value of the
"Maximum Number of concatenated ATM cells" Pseudowire Interface
...
... pseudowire failure between them, they do not generate any OAM
cells, but rather bring down the ATM interfaces to the CEs (e.g.,
...
... but those issues are not affected by the application specified
herein. Note that the security of the transported ATM service will
only be as good as the security ...
... PWE3 Working Group is also undertaking
additional work on ATM-related congestion issues, and implementers
...
... should anticipate that an RFC will be published describing additional
congestion control techniques that should be applied to ATM emulation
over pseudowires.
...
... Encapsulation Methods for Transport of Asynchronous Transfer Mode (ATM) over MPLS Networks", RFC 4717prop, December 2006. ...