1 - 2 - 3 - 4 - 6 - 8 - A - B - C - D - E - F - G - H - I - L - M - N - O - P - Q - R - S - T - U - V
requirement
Click on the red underlined text to get to the source
... 1.4
This International Standard also specifies conformance
requirements for systems implementing these procedures. It does
not contain tests which can be used to demonstrate this
conformance.
...
... 3.2.16 invalid TPDU:
A TPDU that does not comply with the requirements of this
International Standard for structure and encoding.
...
... A reference that is not available for assignment to a connection
because of the requirements of 6.18.
3.2.26 unassigned reference:
...
...
a) select network service which best matches the requirement
of the TS-user taking into account charges for various
...
... network services in terms of
quality with respect to error behavior in relation to user
requirements; its main purpose is to provide a basis for the
decision regarding which class of transport protocol ...
... created, the quality of
service requested is a local matter, although it will
normally be related to the requirements of transport
connection(s) expected to be assigned to it.
...
... there are subsequent DT TPDUs in the sequence.
2. There is no requirement that the DT TPDUs shall be of the
maximum length selected during connection establishment.
...
... The window synchronization procedures (see 12.2.3.8) ensure that
this requirement is met.
NOTE - It is likely that the release procedure initiated due to
...
...
A system claiming to implement the procedures specified in this
standard shall comply with the requirements in 14.2 - 14.5.
14.2
...
... 2) the maximum for which conformance is claimed.
NOTE - This requirement indicates that TPDU sizes of 128
octets are always implemented.
...